GM 22936101 OEM 5 Button Key Fob

This is a Factory OEM (Original Equipment Manufacturer) GM 5 Button keyless entry remote, aka “key fob”.

Genuine OEM electronics in a new aftermarket case.

GM

• 2008-2017 Buick Enclave
• 2006-2011 Cadillac DTS
• 2007-2014 Cadillac Escalade
• 2007-2013 Chevrolet Avalanche
• 2012-2014 Chevrolet Captiva Sport
• 2007-2010 Chevrolet Equinox
• 2003-2014 Chevrolet Express
• 2006-2013 Chevrolet Impala
• 2006-2007 Chevrolet Monte Carlo
• 2007-2013 Chevrolet Silverado
• 2007-2014 Chevrolet Suburban
• 2007-2014 Chevrolet Tahoe
• 2009-2017 Chevrolet Traverse
• 2007-2016 GMC Acadia
• 2003-2012 GMC Savana
• 2007-2014 GMC Sierra
• 2011 GMC Terrain
• 2007-2014 GMC Yukon
• 2007-2009 Pontiac Torrent
• 2007-2010 Saturn Outlook
• 2008-2010 Saturn Vue
• 2007-2009 Suzuki XL7

NOTE: 2011 & newer vehicles must be programmed by an automotive locksmith or dealership.

Procedure #1

THIS PROCEDURE IS FOR VEHICLES WITH THE DRIVER INFORMATION CENTER. IT WILL BE A BUTTON TO THE RIGHT OF THE STEERING WHEEL WITH A VEHICLE ICON AND THE LETTER i.

1. Insert key and switch the ignition ON (just shy of starting vehicle without cranking engine)

2. Press vehicle information button until PRESS TO RELEARN REMOTE KEY is displayed.

3. Press the set/reset button (button will have a check mark) until REMOTE KEY LEARNING ACTIVE is displayed. Vehicle is now in programming mode.

4. Press and hold LOCK and UNLOCK buttons at the same time on first remote for approximately 15 seconds. An acoustic signal will be heard indicating successful programming.

5. Repeat step 4 to program additional remotes. You can have up to 8 programmed remotes for this vehicle. You must program ALL remotes including existing remotes.

6. To exit programming mode turn ignition OFF, remove key and test all remotes.

Procedure #2

THIS PROCEDURE IS FOR VEHICLES WITHOUT THE DRIVERS INFORMATION CENTER.

1. Insert key into the ignition and turn to ON (Just shy of starting vehicle without cranking engine).

2. Press the trip odometer reset button until RELEARN REMOTE KEY is displayed.

3. Press and hold the trip odometer reset button for approximately 3 seconds until REMOTE KEY LEARNING ACTIVE displays.

4. Press and hold LOCK and UNLOCK buttons at the same time on first remote for approximately 15 seconds. An acoustic signal will be heard indicating successful programming.

5. Repeat step 4. to program additional remotes. You can have up to 8 programmed remotes for this vehicle. You must program ALL remotes including existing remotes.

6. To exit programming mode turn ignition OFF, remove key and test all remotes.

OEM Key Fobs:

We are proud to offer true OEM key fobs direct to you at up to 80% off dealer prices. There is a catch though, so here it goes:

You need to know the only way to get a NEW OEM key fob is to go to a dealer or authorized reseller of OEM parts, and you will pay dealer prices if you do this and spend hundreds of dollars.

Our Products:

The key fob you are going to purchase from us is used or as we like to say “previously loved”. We recycle OEM key fobs and put them through a rigorous refurbishing process so we can guarantee our products and offer them at a reasonable price along with saving the environment. Oh, and we are not robbing you of your hard earned dollars like the stealership does. So if you are good with all of this what are you waiting for? Make your life easier, order a key fob from us and save the world!

22936101 OEM Key Fob Circuit Board with New Remote Case